August 2006
Four Hewlett-Packard Security Advisories: HPSBGN02136 SSRT061173 rev.1; HPSBUX02087 SSRT4728 rev.3; HPSBUX02108 SSRT061133 rev.13; HPSBUX02124 SSRT061159 rev.1
ID: 00531
Ref: 510/2006
Date: 03 August 2006:14:18:58
Version: 1
Title: Four Hewlett-Packard Security Advisories: HPSBGN02136 SSRT061173 rev.1; HPSBUX02087 SSRT4728 rev.3; HPSBUX02108 SSRT061133 rev.13; HPSBUX02124 SSRT061159 rev.1
Abstract:
Vendors affected: Hewlett-Packard
Operating systems affected: Hewlett-Packard
Applications affected: Hewlett-Packard
1.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c00732233
Version: 1
HPSBGN02136 SSRT061173 rev.1 - ProCurve Series 3500yl, 6200yl, and
5400zl
Switches Running Software Prior to K.11.33 Remote Denial of Service
(DoS)
NOTICE: The information in this Security Bulletin should be acted upon
as soon as possible.
Release Date: 2006-07-26
Last Updated: 2006-07-31
Potential Security Impact: Remote Denial of Service (DoS)
Source: Hewlett-Packard Company,
HP Software Security Response Team
VULNERABILITY SUMMARY
A potential security vulnerability has been identified in the ProCurve
Series 3500yl,
6200yl, and 5400zl Switches. The vulnerability could be exploited
remotely resulting
in a Denial of Service (DoS).
References: none
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
ProCurve series software prior to K.11.33 on ProCurve Series 3500yl,
6200yl,
and 5400zl switches
BACKGROUND
RESOLUTION
HP has made the version K.11.33 software for the ProCurve Series 3500yl,
6200yl,
and 5400zl Switches available to resolve the issue. The version K.11.33
software
can be downloaded from the Procurve Networking Software for Switches
website: http://www.hp.com/rnd/software/switches.htm
PRODUCT SPECIFIC INFORMATION
HISTORY
Version:1 (rev.1) 31 July 2006 Initial release
Support: For further information, contact normal HP Services
support channel.
Report: To report a potential security vulnerability with any HP
supported product, send Email to: security-alert@hp.com. It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To get the security-alert PGP key, please send an
e-mail message as follows:
To: security-alert@hp.com
Subject: get key
Subscribe: To initiate a subscription to receive future HP
Security Bulletins via Email:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&
langcode=USENG&jumpid=in_SC-GEN__driverITRC&topiccode=ITRC
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your ITRC security bulletins and patches
- check ALL categories for which alerts are required and
continue.
Under Step2: your ITRC operating systems
- verify your operating system selections are checked and
save.
To update an existing subscription:
http://h30046.www3.hp.com/subSignIn.php
Log in on the web page:
Subscriber's choice for Business: sign-in.
On the web page:
Subscriber's Choice: your profile summary
- use Edit Profile to update appropriate sections.
To review previously published Security Bulletins visit:
http://www.itrc.hp.com/service/cki/secBullArchive.do
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters of the
Bulletin number in the title:
GN = HP General SW,
MA = HP Management Agents,
MI = Misc. 3rd party SW,
MP = HP MPE/iX,
NS = HP NonStop Servers,
OV = HP OpenVMS,
PI = HP Printing & Imaging,
ST = HP Storage SW,
TL = HP Trusted Linux,
TU = HP Tru64 UNIX,
UX = HP-UX,
VV = HP Virtual Vault
System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.
"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently, HP
will not be responsible for any damages resulting from user's use
or disregard of the information provided in this Bulletin. To the
extent permitted by law, HP disclaims all warranties, either
express or implied, including the warranties of merchantability
and fitness for a particular purpose, title and non-infringement."
(c)Copyright 2006 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP nor its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
respective owners.
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
iQA/AwUBRNCAheAfOvwtKn1ZEQJrVwCeIZ2xp5EVs0xCVijFl34gXqnpD4kAn1Od
unr2mq2X10eSM+fjlUWtnIPw
=PflL
-----END PGP SIGNATURE-----
2.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c00579189
Version: 3
HPSBUX02087 SSRT4728 rev.3 - HP-UX running TCP/IP Remote Denial of
Service (DoS)
NOTICE: The information in this Security Bulletin should be acted upon
as soon as possible.
Release Date: 2005-12-09
Last Updated: 2006-07-30
Potential Security Impact: Remote Denial of Service (DoS)
Source: Hewlett-Packard Company, HP Software Security Response Team
VULNERABILITY SUMMARY
A potential security vulnerability has been identified with HP-UX
running TCP/IP.
The potential vulnerability could be exploited remotely to cause a
Denial of Service (DoS).
References: CVE-2004-0744
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP-UX B.11.00, B.11.04, B.11.11, B.11.23 running TCP/IP.
BACKGROUND
To determine if an HP-UX system has an affected version,
search the output of "swlist -a revision -l fileset"
for one of the filesets listed below. For affected systems
verify that the recommended action has been taken.
AFFECTED VERSIONS
HP-UX B.11.00
=============
Networking.NET-KRN
action: install PHNE_33395 or subsequent and install sqmax (see
Resolution section)
HP-UX B.11.04
=============
Networking.NET-KRN
action: install PHNE_33427 or subsequent and install sqmax (see
Resolution section)
HP-UX B.11.11
=============
Streams.STREAMS-KRN
->action: install PHNE_34131 or subsequent
HP-UX B.11.23
=============
Streams.STREAMS2-KRN
action: install PHKL_31500 or subsequent
END AFFECTED VERSIONS
RESOLUTION
HP has made patches and product updates available to resolve the issue.
->After installing the recommended patches for B.11.00 and B.11.04
a system parameter must be set. A utility, sqmax, must be
downloaded and installed to set the required system parameter as
discussed below.
B.11.00
install PHNE_33395 or subsequent
then install sqmax as discussed below
B.11.04
install PHNE_33427 or subsequent
then install sqmax as discussed below
B.11.11
->install PHNE_34131 or subsequent
->sqmax not required
B.11.23
install PHKL_31500 or subsequent
sqmax not required
The patches are available from http://itrc.hp.com
->For B.11.00 and B.11.04:
After the patches listed above are installed an internal system
parameter
must be set. A utility, sqmax, has been provided to set the parameter.
The parameter must be set whenever the system is rebooted.
An initialization file (sqmax.init.d) is included with the sqmax
utility.
The instructions in sqmax.readme show how in install the initialization
file
so that the system parameter is set automatically when the system is
rebooted.
The sqmax utility is available via ftp:
System: hprc.external.hp.com (192.170.19.100)
Login: sqmax
Password: sqmax
FTP Access:
ftp://sqmax:sqmax@hprc.external.hp.com/
or:
ftp://sqmax:sqmax@192.170.19.100/
1. Download sqmax.tar from the ftp site into a secure directory.
2. Verify the cksum or md5sum:
cksum 987961878 30720
md5sum 5a140635ac216fe580d7edc0f68a417a
3. Unpack the archive:
tar -xvf sqmax.tar
4. Refer to sqmax.readme for further instructions.
5. After installing sqmax, run "/usr/contrib/bin/sqmax 1000".
6. As discussed in sqmax.readme, "/usr/contrib/bin/sqmax 1000"
can be run automatically when the system is rebooted.
->The version of sqmax cited in rev.1 of this Security Bulletin will
exit
with a failure message when executed on a B.11.04 system. A new
version has been provided which functions correctly on B.11.00 and
B.11.04.
The previous version functions correctly on B.11.00. There is no need to
download the new version for B.11.00 systems.
The new sqmax has the following what(1) string:
$Revision: 92453-07 linker linker crt0.o B.11.33 020605 $
sqmax: $Revision: 3.0 $ $Date: 07/17/2006 WTEC TSO Supported - MW $
The previous sqmax has the following what(1) string:
$Revision: 92453-07 linker linker crt0.o B.11.33 020605 $
sqmax: $Revision: 2.0 $ $Date: 10/11/2004 WTEC TSO Supported - MW $
MANUAL ACTIONS: Yes - NonUpdate
- ->B.11.00, B.11.04 - After installing patch, install sqmax.
Run "/usr/contrib/bin/sqmax 1000" or reboot.
PRODUCT SPECIFIC INFORMATION
HP-UX Security Patch Check: Security Patch Check revision B.02.00
analyzes all HP-issued Security Bulletins to provide a subset of
recommended actions that potentially affect a specific HP-UX
system. For more information:
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumbe
r=B6834AA
HISTORY
Version:1 (rev.1) 14 December 2005 Initial release
Version:2 (rev.2) 24 July 2006 New sqmax utility for B.11.04, augmented
installation instructions
Version:3 (rev.3) 31 July 2006 PHNE_34131 is available for B.11.11
Support: For further information, contact normal HP Services
support channel.
Report: To report a potential security vulnerability with any HP
supported product, send Email to: security-alert@hp.com. It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To get the security-alert PGP key, please send an
e-mail message as follows:
To: security-alert@hp.com
Subject: get key
Subscribe: To initiate a subscription to receive future HP
Security Bulletins via Email:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&
langcode=USENG&jumpid=in_SC-GEN__driverITRC&topiccode=ITRC
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your ITRC security bulletins and patches
- check ALL categories for which alerts are required and
continue.
Under Step2: your ITRC operating systems
- verify your operating system selections are checked and
save.
To update an existing subscription:
http://h30046.www3.hp.com/subSignIn.php
Log in on the web page:
Subscriber's choice for Business: sign-in.
On the web page:
Subscriber's Choice: your profile summary
- use Edit Profile to update appropriate sections.
To review previously published Security Bulletins visit:
http://www.itrc.hp.com/service/cki/secBullArchive.do
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters of the
Bulletin number in the title:
GN = HP General SW,
MA = HP Management Agents,
MI = Misc. 3rd party SW,
MP = HP MPE/iX,
NS = HP NonStop Servers,
OV = HP OpenVMS,
PI = HP Printing & Imaging,
ST = HP Storage SW,
TL = HP Trusted Linux,
TU = HP Tru64 UNIX,
UX = HP-UX,
VV = HP Virtual Vault
System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.
"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently, HP
will not be responsible for any damages resulting from user's use
or disregard of the information provided in this Bulletin. To the
extent permitted by law, HP disclaims all warranties, either
express or implied, including the warranties of merchantability
and fitness for a particular purpose, title and non-infringement."
(c)Copyright 2006 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP nor its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
respective owners.
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
iQA/AwUBRNCHMeAfOvwtKn1ZEQKi9ACgx58pZST2yacC7qB0r+m8vzw3yAQAnjPH
qFZn3VxCyaW8XUCK9gIMw+7U
=Jo2E
-----END PGP SIGNATURE-----
3.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c00629555
Version: 13
HPSBUX02108 SSRT061133 rev.13 - HP-UX Running Sendmail,
Remote Execution of Arbitrary Code
NOTICE: The information in this Security Bulletin should be acted upon
as soon as possible.
Release Date: 2006-07-28
Last Updated: 2006-07-31
Potential Security Impact: Remote Execution of Arbitrary Code
Source: Hewlett-Packard Company, HP Software Security Response Team
VULNERABILITY SUMMARY
A vulnerability has been identified in Sendmail which may allow
a remote attacker to execute arbitrary code.
References: CVE-2006-0058
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP-UX B.11.00, B.11.04, B.11.11, B.11.23.
BACKGROUND
CERT has published a vulnerability report available at:
http://www.kb.cert.org/vuls/id/834865
This bulletin will be revised as other versions of Sendmail become
available.
To determine if an HP-UX system has an affected version, search the
output of
"swlist -a revision -l fileset" for one of the filesets listed below.
For affected
systems verify that the recommended action has been taken.
AFFECTED VERSIONS
For sendmail 8.13.3
HP-UX B.11.23
===========
SMAIL-UPGRADE.INET-SMAIL
SMAIL-UPGRADE.INET2-SMAIL
action: install revision B.11.23.01.003 or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL813
HP-UX B.11.11
============
SMAIL-UPGRADE.INETSVCS-SMAIL
action: install revision B.11.11.02.004 or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL813
For sendmail 8.11.1
HP-UX B.11.23
===========
UNOF_INET31734_1.INETSVCS2-RUN
UNOF_INET31734_3.INETSVCS2-RUN
UNOF_INET31734_4.INETSVCS2-RUN
->action: remove any official patch if installed,
InternetSrvcs.INETSVCS2-RUN
->action: install PHNE_34689 or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
HP-UX B.11.11
===========
SMAIL-811.INETSVCS-SMAIL
->action: install revision B.11.11.01.010 or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
URL: ftp://sendmail:sendmail@hprc.external.hp.com/sendmail-811_10.depot
HP-UX B.11.00
============
SMAIL-811.INETSVCS-SMAIL
->action: install revision B.11.00.01.009 or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
->URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL811
For sendmail 8.9.3
HP-UX B.11.11
===========
InternetSrvcs.INETSVCS-RUN
UNOF_INET_29774_1.INETSVCS-RUN
UNOF_INET_29774_2.INETSVCS-RUN
UNOF_INET_29774_3.INETSVCS-RUN
->action: remove any unofficial patch if installed, install PHNE_34936
or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
HP-UX B.11.00
===========
InternetSrvcs.INETSVCS-RUN
UNOF_INET_29773_1.INETSVCS-RUN
UNOF_INET_29773_2.INETSVCS-RUN
UNOF_INET_29773_3.INETSVCS-RUN
->action: remove any unofficial patch if installed, install PHNE_34900
or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
HP-UX B.11.04
===========
InternetSrvcs.INETSVCS-RUN
UNOF_INET_29773_1.INETSVCS-RUN
UNOF_INET_29773_2.INETSVCS-RUN
UNOF_INET_29773_3.INETSVCS-RUN
action: remove any unofficial patch if installed, install PHNE_34927 or
subsequent,
For sendmail 8.8.6
HP-UX B.11.00
===========
InternetSrvcs.INETSVCS-RUN
UNOF_INET_29773_1.INETSVCS-RUN
UNOF_INET_29773_2.INETSVCS-RUN
UNOF_INET_29773_3.INETSVCS-RUN
->action: remove any unofficial patch if installed, install PHNE_34900
or subsequent,
modify /etc/mail/sendmail.cf to add 'restrictqrun' to the
PrivacyOptions.
END AFFECTED VERSIONS
RESOLUTION
HP has made the following software updates and patches available to
resolve the issue.
The patches are available from http://itrc.hp.com
while webupgrades can be downloaded from http://software.hp.com
The preliminary software updates can be downloaded via ftp from:
System: hprc.external.hp.com (192.170.19.100)
Login: sendmail
Password: sendmail (NOTE: CASE-sensitive)
ftp://sendmail:sendmail@hprc.external.hp.com
or
ftp://sendmail:sendmail@192.170.19.100
The webupgrades for sendmail 8.13.3 on B.11.11 as well as B.11.23 can be
downloaded from http://software.hp.com using the URL above.
The cksum and md5 output for the preliminary depots are listed below.
The cksum and md5 output are also found the README.txt.pgp on the ftp
site.
For sendmail 8.13.3, HP-UX B.11.23
sendmail -bs banner:
Sendmail version 8.13.3 - Revision 1.003 - 2006/05/24
what(1) string:
Sendmail version 8.13.3 - Revision 1.003 - 05/24/2006
For sendmail 8.13.3, HP-UX B.11.11
sendmail -bs banner:
Sendmail version 8.13.3 - Revision 2.004 - 2006/06/29
what(1) string:
Sendmail version 8.13.3 - Revision 2.004 - 06/29/2006
For sendmail 8.11.1, HP-UX B.11.23
Note: If UNOF_INET31734_1.depot or UNOF_INET31734_3.depot or
UNOF_INET31734_4.depot has been installed, they must be removed
using swremove(1M) before installing PHNE_34689.
sendmail -bs banner:
->Sendmail 8.11.1 (Revision 1.09)/8.9.3
what(1) string:
->version.c 8.11.1 (Berkeley) - 28th June 2006 (PHNE_34689)
For sendmail 8.11.1, HP-UX B.11.11
sendmail-811_10.depot
->cksum 3720753575 2949120
->md5 01f5e7c1a67c0b0a1103abdaa2907f21
sendmail -bs banner:
Sendmail 8.11.1 (Revision 1.10)
what(1) string:
version.c 8.11.1 (Berkeley) - (Revision 1.10) - 17th July 2006
For sendmail 8.11.1, HP-UX B.11.00
sendmail -bs banner:
->Sendmail 8.11.1 - (Revision 1.09)
what(1) string:
->version.c 8.11.1 (Berkeley) - (Revision 1.09) - 4th July 2006
For sendmail 8.9.3, HP-UX B.11.11
->If UNOF_INET_29774_3.depot or previous is installed, remove it using
swremove(1M). Then install:
->PHNE_34936 or subsequent
For sendmail 8.9.3, HP-UX B.11.00
->If UNOF_INET_29772_3.depot or previous is installed, remove it using
swremove(1M). Then install:
->PHNE_34900 or subsequent
For sendmail 8.9.3, HP-UX B.11.04
If UNOF_INET_29772_3.depot or previous is installed, remove it using
swremove(1M). Then install:
PHNE_34927 or subsequent
sendmail -bs banner:
Sendmail 8.9.3 (PHNE_32006)/8.9.3; Fri, 7 Jul 2006
what(1) string:
version.c 8.9.3.1 (Berkeley) 11/05/2006 (PHNE_32006)
Special Installation Instructions - Note: sendmail is not supported in
daemon mode on
VVOS platforms. It is provided as a mailing agent (outbound) only.
For sendmail 8.8.6, HP-UX B.11.00
If UNOF_INET_29772_3.depot or previous is installed, remove it using
swremove(1M). Then install:
->PHNE_34900 or subsequent
->Note: PHNE_34900 or subsequent upgrades sendmail 8.8.6 to sendmail
8.9.3.
For all versions of sendmail:
modify sendmail.cf to add 'restrictqrun' to the PrivacyOptions.
After installation, verify output of what /usr/sbin/sendmail.
To check if installations are running sendmail 8.8.6 execute "what
/usr/sbin/sendmail"
and check the version string.
MANUAL ACTIONS: Yes - NonUpdate
For all versions modify /etc/mail/sendmail.cf to add 'restrictqrun' to
the PrivacyOptions
HP-UX B.11.11 - install preliminary software
HP-UX B.11.23 - install preliminary software
PRODUCT SPECIFIC INFORMATION
HP-UX Security Patch Check: Security Patch Check revision B.02.00
analyzes all
HP-issued Security Bulletins to provide a subset of recommended actions
that
potentially affect a specific HP-UX system. For more information:
http://software.hp.com/portal/swdepot/displayProductInfo.do?productNumbe
r=B6834AA
HISTORY:
Version: 1 (rev.1) - 25 March 2006 Initial release
Version: 2 (rev.2) - 30 March 2006 updated md5 / cksum output
Version: 3 (rev.3) - 04 April 2006 updated B.11.23 depot, added 8.11.1
for B.11.23 depot
Version: 4 (rev.4) - 07 April 2006 added 8.9.3 depot for B.11.11
Version: 5 (rev.5) - 10 April 2006 clarified affected versions
Version: 6 (rev.6) - 12 April 2006 added 8.9.3 and 8.11.1 depots for
B.11.00
Version: 7 (rev.7) - 18 April 2006 added 8.11.1 upgrade for HP-UX
B.11.11
Version: 8 (rev.8) - 24 April 2006 replaced 8.9.3 depot for HP-UX
B.11.00 and B.11.11
Version: 9 (rev.9) - 25 April 2006 added manual actions
Version: 10 (rev.10) - 03 May 2006 replaced 8.9.3 depot for HP-UX
B.11.00 and B.11.11,
added 8.11.1 depot for B.11.00
Version: 11 (rev.11) - 18 May 2006 sendmail 8.11.1 replacements
UNOF_INET31734_4,
sendmail-811_01.008 depot, and sendmail-811_09.depot, sendmail 8.9.3 new
PHNE_31917,
sendmail 8.8.6, sendmail 8.9.3 new PHNE_32006
Version: 12 (rev.12) - 18 July 2006 added webupgrades for 8.11.1 on
B.11.00,
and 8.13.3 on B.11.11; added patch for B.11.04.
Version: 13 (rev.13) - 31 July 2006 added PHNE_34900 for 8.9.3 on
B.11.00,
PHNE_34936 for 8.9.3 on B.11.11, PHNE_34689 for 8.11.1 on B.11.23,
sendmail-811_01.009, sendmail-811_10.depot.
Support: For further information, contact normal HP Services
support channel.
Report: To report a potential security vulnerability with any HP
supported product, send Email to: security-alert@hp.com. It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To get the security-alert PGP key, please send an
e-mail message as follows:
To: security-alert@hp.com
Subject: get key
Subscribe: To initiate a subscription to receive future HP
Security Bulletins via Email:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&
langcode=USENG&jumpid=in_SC-GEN__driverITRC&topiccode=ITRC
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your ITRC security bulletins and patches
- check ALL categories for which alerts are required and
continue.
Under Step2: your ITRC operating systems
- verify your operating system selections are checked and
save.
To update an existing subscription:
http://h30046.www3.hp.com/subSignIn.php
Log in on the web page:
Subscriber's choice for Business: sign-in.
On the web page:
Subscriber's Choice: your profile summary
- use Edit Profile to update appropriate sections.
To review previously published Security Bulletins visit:
http://www.itrc.hp.com/service/cki/secBullArchive.do
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters of the
Bulletin number in the title:
GN = HP General SW,
MA = HP Management Agents,
MI = Misc. 3rd party SW,
MP = HP MPE/iX,
NS = HP NonStop Servers,
OV = HP OpenVMS,
PI = HP Printing & Imaging,
ST = HP Storage SW,
TL = HP Trusted Linux,
TU = HP Tru64 UNIX,
UX = HP-UX,
VV = HP Virtual Vault
System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.
"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently, HP
will not be responsible for any damages resulting from user's use
or disregard of the information provided in this Bulletin. To the
extent permitted by law, HP disclaims all warranties, either
express or implied, including the warranties of merchantability
and fitness for a particular purpose, title and non-infringement."
(c)Copyright 2006 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP nor its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
respective owners.
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
iQA/AwUBRNCD8eAfOvwtKn1ZEQIzUwCeLpurM3gh8uBgETYypT4aMcvVNN8An1xm
8NbaULSVF0Bc+aSs/zXjd8Ek
=Md9O
-----END PGP SIGNATURE-----
4.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
SUPPORT COMMUNICATION - SECURITY BULLETIN
Document ID: c00680632
Version: 1
HPSBUX02124 SSRT061159 rev.1 - HP-UX Sendmail MIME Remote Denial of
Service (DoS)
NOTICE: The information in this Security Bulletin should be acted upon
as soon as possible.
Release Date: 2006-07-31
Last Updated: 2006-07-31
Potential Security Impact: Remote Denial of Service (DoS)
Source: Hewlett-Packard Company, HP Software Security Response Team
VULNERABILITY SUMMARY
A potential security vulnerability has been identified with HP-UX
running Sendmail
processing malformed multipart MIME messages. This vulnerability could
potentially
allow a remote unauthenticated user to cause a Denial of Service (DoS).
References: CVE-2006-1173
SUPPORTED SOFTWARE VERSIONS*: ONLY impacted versions are listed.
HP-UX B.11.00, B.11.04, B.11.11, B.11.23
BACKGROUND
To determine if an HP-UX system has an affected version, search the
output of
"swlist -a revision -l fileset" for one of the filesets listed below.
For affected
systems verify that the recommended action has been taken.
AFFECTED VERSIONS
For sendmail 8.13.3
HP-UX B.11.23
==========
SMAIL-UPGRADE.INET-SMAIL
SMAIL-UPGRADE.INET2-SMAIL
action: install revision B.11.23.01.003 or subsequent
URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL813
HP-UX B.11.11
===========
SMAIL-UPGRADE.INETSVCS-SMAIL
action: install revision B.11.11.02.004 or subsequent
URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL813
For sendmail 8.11.1
HP-UX B.11.23
==========
InternetSrvcs.INETSVCS2-RUN
action: install PHNE_34689 or subsequent
HP-UX B.11.11
===========
SMAIL-811.INETSVCS-SMAIL
->action: install revision B.11.11.01.010 or subsequent
URL: ftp://sendmail:sendmail@hprc.external.hp.com/sendmail-811_10.depot
HP-UX B.11.00
===========
SMAIL-811.INETSVCS-SMAIL
action: install revision B.11.00.01.009 or subsequent
URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL811
For sendmail 8.9.3
HP-UX B.11.11
===========
InternetSrvcs.INETSVCS-RUN
action: install PHNE_34936 or subsequent
HP-UX B.11.04
===========
InternetSrvcs.INETSVCS-RUN
action: install PHNE_34927 or subsequent
HP-UX B.11.00
===========
InternetSrvcs.INETSVCS-RUN
action: install PHNE_34900 or subsequent
For sendmail 8.8.6
HP-UX B.11.00
==========
InternetSrvcs.INETSVCS-RUN
action: install PHNE_34900 or subsequent
END AFFECTED VERSIONS
RESOLUTION
HP has made the following software updates and patches available to
resolve the issue.
PHNE_34689 PHNE_34900 PHNE_34927 PHNE_34936 SMAIL-811, SMAIL-UPGRADE
The patches are available from http://itrc.hp.com
while webupgrades for sendmail 8.13.3 on B.11.11 as well as for sendmail
8.11.1
can be downloaded from http://software.hp.com
The following banner output and what(1) strings from these new binaries
(as of this bulletin release) are for reference.
For sendmail 8.13.3, HP-UX B.11.23
sendmail -bs banner:
Sendmail version 8.13.3 - Revision 1.003 - 2006/05/24
what(1) string:
Sendmail version 8.13.3 - Revision 1.003 - 05/24/2006
URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL813
For sendmail 8.13.3, HP-UX B.11.11
sendmail -bs banner:
Sendmail version 8.13.3 - Revision 2.004 - 2006/06/29
what(1) string:
Sendmail version 8.13.3 - Revision 2.004 - 06/29/2006
URL:
http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNu
mber=SMAIL813
For sendmail 8.11.1, HP-UX B.11.23
sendmail -bs banner:
Sendmail 8.11.1 (Revision 1.09)/8.9.3
what(1) string:
version.c 8.11.1 (Berkeley) - 28th June 2006 (PHNE_34689)
For sendmail 8.11.1, HP-UX B.11.11
sendmail-811_10.depot
cksum 3720753575 2949120
md5 01f5e7c1a67c0b0a1103abdaa2907f21
sendmail -bs banner:
Sendmail 8.11.1 (Revision 1.10)
what(1) string:
version.c 8.11.1 (Berkeley) - (Revision 1.10) - 17th July 2006
For sendmail 8.11.1, HP-UX B.11.00
sendmail -bs banner:
Sendmail 8.11.1 - (Revision 1.09)
what(1) string:
version.c 8.11.1 (Berkeley) - (Revision 1.09) - 4th July 2006
For sendmail 8.9.3, HP-UX B.11.11
Install PHNE_34936 or subsequent
For sendmail 8.9.3, HP-UX B.11.00
Install PHNE_34900 or subsequent
For sendmail 8.9.3, HP-UX B.11.04
Install PHNE_34927 or subsequent
sendmail -bs banner:
Sendmail 8.9.3 (PHNE_32006)/8.9.3; Fri, 7 Jul 2006
what(1) string:
version.c 8.9.3.1 (Berkeley) 11/05/2006 (PHNE_32006)
Special Installation Instructions - Note: sendmail is not supported in
daemon mode on
VVOS platforms. It is provided as a mailing agent (outbound) only.
For sendmail 8.8.6, HP-UX B.11.00
Install PHNE_32006 or subsequent
Note: PHNE_32006 or subsequent upgrades sendmail 8.8.6 to sendmail
8.9.3.
MANUAL ACTIONS: Yes - Update
HP-UX B.11.23 - install software upgrade
HP-UX B.11.11 - install software upgrade
HP-UX B.11.00 - install software upgrade
PRODUCT SPECIFIC INFORMATION
HP-UX Security Patch Check: Security Patch Check revision B.02.00
analyzes all
HP-issued Security Bulletins to provide a subset of recommended actions
that
potentially affect a specific HP-UX system. For more information:
http://software.hp.com/portal/swdepot/displayProductInfo.do?_productNumb
er=B6834AA
HISTORY:
Version: 1 (rev.1) - 31 July 2006 Initial release
Support: For further information, contact normal HP Services
support channel.
Report: To report a potential security vulnerability with any HP
supported product, send Email to: security-alert@hp.com. It is
strongly recommended that security related information being
communicated to HP be encrypted using PGP, especially exploit
information. To get the security-alert PGP key, please send an
e-mail message as follows:
To: security-alert@hp.com
Subject: get key
Subscribe: To initiate a subscription to receive future HP
Security Bulletins via Email:
http://h30046.www3.hp.com/driverAlertProfile.php?regioncode=NA&
langcode=USENG&jumpid=in_SC-GEN__driverITRC&topiccode=ITRC
On the web page: ITRC security bulletins and patch sign-up
Under Step1: your ITRC security bulletins and patches
- check ALL categories for which alerts are required and
continue.
Under Step2: your ITRC operating systems
- verify your operating system selections are checked and
save.
To update an existing subscription:
http://h30046.www3.hp.com/subSignIn.php
Log in on the web page:
Subscriber's choice for Business: sign-in.
On the web page:
Subscriber's Choice: your profile summary
- use Edit Profile to update appropriate sections.
To review previously published Security Bulletins visit:
http://www.itrc.hp.com/service/cki/secBullArchive.do
* The Software Product Category that this Security Bulletin
relates to is represented by the 5th and 6th characters of the
Bulletin number in the title:
GN = HP General SW,
MA = HP Management Agents,
MI = Misc. 3rd party SW,
MP = HP MPE/iX,
NS = HP NonStop Servers,
OV = HP OpenVMS,
PI = HP Printing & Imaging,
ST = HP Storage SW,
TL = HP Trusted Linux,
TU = HP Tru64 UNIX,
UX = HP-UX,
VV = HP Virtual Vault
System management and security procedures must be reviewed
frequently to maintain system integrity. HP is continually
reviewing and enhancing the security features of software products
to provide customers with current secure solutions.
"HP is broadly distributing this Security Bulletin in order to
bring to the attention of users of the affected HP products the
important security information contained in this Bulletin. HP
recommends that all users determine the applicability of this
information to their individual situations and take appropriate
action. HP does not warrant that this information is necessarily
accurate or complete for all user situations and, consequently, HP
will not be responsible for any damages resulting from user's use
or disregard of the information provided in this Bulletin. To the
extent permitted by law, HP disclaims all warranties, either
express or implied, including the warranties of merchantability
and fitness for a particular purpose, title and non-infringement."
(c)Copyright 2006 Hewlett-Packard Development Company, L.P.
Hewlett-Packard Company shall not be liable for technical or
editorial errors or omissions contained herein. The information
provided is provided "as is" without warranty of any kind. To the
extent permitted by law, neither HP nor its affiliates,
subcontractors or suppliers will be liable for incidental, special
or consequential damages including downtime cost; lost profits;
damages relating to the procurement of substitute products or
services; or damages for loss of data, or software restoration.
The information in this document is subject to change without
notice. Hewlett-Packard Company and the names of Hewlett-Packard
products referenced herein are trademarks of Hewlett-Packard
Company in the United States and other countries. Other product
and company names mentioned herein may be trademarks of their
respective owners.
-----BEGIN PGP SIGNATURE-----
Version: PGP 8.1
iQA/AwUBRNCCBuAfOvwtKn1ZEQLOzgCg4HtxLr63F+jjlMK6cXTL63M6lUsAoJMd
5OTMsloIbjdc2uOP3UdGseWH
=FRYw
-----END PGP SIGNATURE-----