Defensor, Alpha Sensor Cable with Eliminator Analyser

The system has been assessed on a 50m long Woven Mesh Welded Mesh fence approximately 3000mm high was installed; this included a 135° change in direction. A 710mm short barbed taped concertina was fitted; this was supported on 2 No Galvanized line wires fixed to T bars fitted at each post.

A single run of Alpha sensor cable was installed on the fence at a height of 1 m from ground level secured with GQTY-1 UV resistant cable ties spaced at intervals of no more than 200 mm and one GQTY-5 plastic coated steel tie wrap every 1 m.

The zone of the Alpha sensor cable is then terminated into an Eliminator Control Analyser.