- Home
- Catalogue of Security Equipment (CSE)
- Detection Systems
- Defensor, GD 5000 Eliminator on Weld Mesh
Heras
Defensor, GD 5000 Eliminator on Weld Mesh
Category: Detection Systems
Sub Category: Barrier Mounted Detection
Defensor, GD 5000 Eliminator on Weld MeshDescription
This system has been assessed over a section of Anti-Intruder Weld Mesh Fence. One loop of sensor cable was attached to the 2nd and 19th strand from the top of the fence fabric using black plastic cable ties every 200 mm with an additional two reinforced metal cable ties per bay. Another run of sensor cable in flexible armoured conduit was tied to the centre strand of the barbed wire topping using plastic cable ties every 200 mm. The installation drawings are held by NPSA.
The Anti-Intruder Weld Mesh Fence is built to BS 1722 Pt10 and is:
a rolled welded mesh;
apertures of 75 mm vertical x 25 mm horizontal and 3 mm strand thickness;
height of the fence fabric is 2.4 m;
topped with three strands of barbed wire;
overall height of 2.9 m to the top strand of barbed wire; and
each bay is 3 m in width and buried 300 mm into the ground.
This product can also be used in conjunction with the Heras CentrAlert product - CentrAlert is a 19” rack mounted system that allows up to twelve separate dual zone analyser cards, i.e. up to twenty four zones, to be installed in one unit. Further zones can be incorporated by using additional CentrAlert racks
Product Updates
| REVISION DATE | COMMENT |
|---|---|
| 01/04/2022 | Product discontinued by manufacturer. |
| 20/06/2023 | HERAS previously announced the end-of-life of various products on the Geoquip product line (EoL announcement dated 09/04/21). Heras have confirmed this decision has been reversed and this product is now confirmed as available |
