Aluroll Ltd
E130 Elite
Description
Internally face-fitted roller shutter formed using reinforced double skin aluminium laths.
The shutter is described on the following document available from the manufacturer:
- General arrangement drawing of the ‘E130’ SR5 roller shutter with tubular motor (Revision 0, 05/12/2022).
The roller shutter tested was:
- Installed across the rear of a structural opening measuring 1760 mm wide by 1520 mm high.
- Operated using a tubular motor mounted to the protected side.
- Secured in the closed position by the self-locking lath design incorporated within the shutter curtain.
All motor controls are to be located on the secure side of the shutter.