Bridge Expansion Joint Beam

Perimeter Barriers | Vehicle

Bridge Expansion Joint Beam

Manufacturer: ATG Access

Standard tested to: IWA 14-1:2013

Performance rating: V/7200[N2A]/48/30:0.2

Description

Populus XA bollard arrays fitted with an Expansion Barrier Beam.  

The system comprised of two bollard arrays, each with 7 bollards welded onto 4 individual sized and shaped steel plates connected by articulable joints within foundations 8802mm long and 1420mm wide.  
The expansion joint beam was mounted on the two opposing bollards providing a gap between the bollard mounting plates of 4600mm.
The system was placed on a compacted base 80mm below finished ground level.  For the test there was no finished covering, leaving 40mm for either a tarmac or other surface finish.

Foundation: B - Depth ⩽0.5m below ground level